Dell PowerEdge M640 EMC for VRTX enclosure Installation and Service Manual - Page 82
Storage controller card, Removing the storage controller card
View all Dell PowerEdge M640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Figure 43. Installing the PCIe mezzanine card Next steps Follow the procedure listed in After working inside your system on page 46. Storage controller card Removing the storage controller card Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 45. 2. Follow the procedure listed in Before working inside your system on page 45. 3. Remove the following: a. Drives b. Drive backplane c. Drive cage Steps 1. Using the Phillips #2 screwdriver, loosen the retention screws on the drive cable connector and lift it away from the storage controller card. CAUTION: To prevent damage to the storage controller card, you must hold the card only by its edges. 2. Lift the storage controller card away from the system. 82 Installing and removing system components