Dell PowerEdge M640 EMC for VRTX enclosure Installation and Service Manual - Page 80
PCIe mezzanine card, PCIe mezzanine card installation guidelines, Removing the PCIe mezzanine card
![]() |
View all Dell PowerEdge M640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Figure 41. Installing the Network Daughter Card Next steps 1. Install the Mezzanine card. 2. Follow the procedure listed in After working inside your system on page 46. PCIe mezzanine card PCIe mezzanine card installation guidelines Your system supports two PCIe mezzanine cards: • PCIe mezzanine card slot C supports Fabric C. This card must match the fabric type of I/O modules installed in I/O module bays C1 and C2. • PCIe mezzanine card slot B supports Fabric B. This card must match the fabric type of I/O modules installed in I/O module bays B1 and B2. Removing the PCIe mezzanine card Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 45. 2. Follow the procedure listed in Before working inside your system on page 45. Steps 1. Open the retention latch by pressing the ridged area on the retention latch, and lifting the latch up. CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges. 2. Lift the PCIe mezzanine card up and away from the system. 3. Close the retention latch. 80 Installing and removing system components
![](/manual_guide/products/dell-poweredge-m640-emc-vrtx-enclosure-installation-service-manual-1222e51/80.png)