Dell PowerEdge M640 EMC for VRTX enclosure Installation and Service Manual - Page 58
Installing a drive into drive carrier
View all Dell PowerEdge M640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Figure 20. Removing the drive from the drive carrier Next steps If applicable,Install a drive into the drive carrier Installing a drive into drive carrier Prerequisites Follow the safety guidelines listed in Safety instructions on page 45. Steps 1. Insert the drive into the drive carrier, with the connector end of the drive towards the back of the carrier. 2. Align the screw holes on the drive with the screw holes on the drive carrier. 3. Using the Phillips #1 screwdriver, replace the screws to secure the drive to the drive carrier. 58 Installing and removing system components
Figure 20. Removing the drive from the drive carrier
Next steps
If applicable,
Install a drive into the drive carrier
Installing a drive into drive carrier
Prerequisites
Follow the safety guidelines listed in
Safety instructions
on page 45.
Steps
1.
Insert the drive into the drive carrier, with the connector end of the drive towards the back of the carrier.
2.
Align the screw holes on the drive with the screw holes on the drive carrier.
3.
Using the Phillips #1 screwdriver, replace the screws to secure the drive to the drive carrier.
58
Installing and removing system components