Dell PowerEdge M640 EMC for VRTX enclosure Installation and Service Manual - Page 56
Installing a drive carrier
View all Dell PowerEdge M640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
WARNING: Ensure that you back up your data, before removing a drive. For more information about preparing your drive for removal and supported RAID redundancy, see the Troubleshooting guide of your system at Dell.com/ poweredgemanuals. NOTE: Using the management software, prepare the drive for removal. If the drive is online, the green activity or fault indicator flashes while the drive is turning off. When the drive indicators are off, the drive is ready for removal. For more information, see the documentation for the storage controller. Follow the safety guidelines listed in Safety instructions on page 45. Steps 1. Press the button on the drive carrier to open the release handle. 2. Holding the release handle, slide the carrier out. Figure 18. Removing a drive carrier Next steps Install the drive carrier or drive blank. Installing a drive carrier Prerequisites Follow the safety guidelines listed in Safety instructions on page 45. Steps 1. Insert the drive carrier into the drive slot. 2. Push the release handle until the carrier locks in place. 56 Installing and removing system components