Dell PowerEdge M640 EMC for VRTX enclosure Installation and Service Manual - Page 60
Installing the drive cage
View all Dell PowerEdge M640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Figure 22. Removing the drive cage Next steps Install the drive cage Installing the drive cage Prerequisites Follow the safety guidelines listed in Safety instructions on page 45. Steps 1. Align the screw holes on the drive cage with the screw holes on the system. 2. Lower the drive cage into the system until the drive cage is seated in place. 3. Using the Phillips #1 screwdriver, replace the screws to secure the drive cage to the system. 60 Installing and removing system components
Figure 22. Removing the drive cage
Next steps
Install the drive cage
Installing the drive cage
Prerequisites
Follow the safety guidelines listed in
Safety instructions
on page 45.
Steps
1.
Align the screw holes on the drive cage with the screw holes on the system.
2.
Lower the drive cage into the system until the drive cage is seated in place.
3.
Using the Phillips #1 screwdriver, replace the screws to secure the drive cage to the system.
60
Installing and removing system components