Dell PowerEdge M640 EMC for VRTX enclosure Installation and Service Manual - Page 54
Drives, Removing a drive blank
![]() |
View all Dell PowerEdge M640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Figure 15. Installing the air shroud Next steps 1. Follow the procedure listed in After working inside your system on page 46. Drives NOTE: Mixing of PCIe, SSD, SAS or SATA drives is not supported. Removing a drive blank Prerequisites CAUTION: To maintain proper system cooling, all empty drive slots must have drive blanks installed. Follow the safety guidelines listed in Safety instructions on page 45. Steps Press the release button and slide the drive blank out of the drive slot. 54 Installing and removing system components
![](/manual_guide/products/dell-poweredge-m640-emc-vrtx-enclosure-installation-service-manual-1222e51/54.png)
Figure 15. Installing the air shroud
Next steps
1.
Follow the procedure listed in
After working inside your system
on page 46.
Drives
NOTE:
Mixing of PCIe, SSD, SAS or SATA drives is not supported.
Removing a drive blank
Prerequisites
CAUTION:
To maintain proper system cooling, all empty drive slots must have drive blanks installed.
Follow the safety guidelines listed in
Safety instructions
on page 45.
Steps
Press the release button and slide the drive blank out of the drive slot.
54
Installing and removing system components