Dell PowerEdge R440 EMC Installation and Service Manual - Page 134
Installing the system board
![]() |
View all Dell PowerEdge R440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Figure 111. Removing the system board Next steps Install the system board. Installing the system board Prerequisites Follow the safety guidelines listed in Safety instructions. Steps 1. Unpack the new system board assembly. CAUTION: Do not lift the system board by holding a memory module, processor, or other components. CAUTION: Take care not to damage the system identification button while placing the system board into the chassis. 2. Holding the system board holder, align the connector on the system board with the slots on the back of the chassis and place the system board in place. 3. Using a Phillips #2 screwdriver, replace the screws that secure the system board to the chassis. 134 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r440-emc-installation-service-manual-3131fb9/134.png)
Figure 111. Removing the system board
Next steps
Install the system board.
Installing the system board
Prerequisites
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Unpack the new system board assembly.
CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
CAUTION:
Take care not to damage the system identification button while placing the system board into the chassis.
2.
Holding the system board holder, align the connector on the system board with the slots on the back of the chassis and place the
system board in place.
3.
Using a Phillips #2 screwdriver, replace the screws that secure the system board to the chassis.
134
Installing and removing system components