Dell PowerEdge R440 EMC Installation and Service Manual - Page 71

Installing the intrusion switch

Get Dell PowerEdge R440 PDF manuals and user guides View all Dell PowerEdge R440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Figure 28. Removing an intrusion switch Next steps Install intrusion switch. Installing the intrusion switch Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 58. 2. Follow the procedure listed in Before working inside your system on page 59. Steps 1. Align the intrusion switch with the intrusion switch slot. Figure 29. Installing intrusion switch 2. Slide the intrusion switch until it is firmly seated in the intrusion switch slot. 3. Connect the intrusion switch cable to the connector on the system board. Next steps 1. Install internal PERC riser. 2. Follow the procedure listed in After working inside your system on page 59. Installing and removing system components 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
Figure 28. Removing an intrusion switch
Next steps
Install intrusion switch
.
Installing the intrusion switch
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 58.
2.
Follow the procedure listed in
Before working inside your system
on page 59.
Steps
1.
Align the intrusion switch with the intrusion switch slot.
Figure 29. Installing intrusion switch
2.
Slide the intrusion switch until it is firmly seated in the intrusion switch slot.
3.
Connect the intrusion switch cable to the connector on the system board.
Next steps
1.
Install internal PERC riser.
2.
Follow the procedure listed in
After working inside your system
on page 59.
Installing and removing system components
71