Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 111
properly. See Entering the System Setup Program on Exit the System Setup program.
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Figure 3-22. Replacing the System Battery 1 2 3 1 positive side of battery connector 3 negative side of battery connector 2 system battery NOTICE: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery. 5 Install the new system battery. a Support the battery connector by pressing down firmly on the positive side of the connector. b Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector. c Press the battery straight down into the connector until it snaps into place. 6 Close the system. See "Closing the System" on page 67. 7 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. 8 Enter the System Setup program to confirm that the battery is operating properly. See "Entering the System Setup Program" on page 45. 9 Enter the correct time and date in the System Setup program's Time and Date fields. 10 Exit the System Setup program. Installing System Components 111