Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 150
Troubleshooting the Microprocessors
![]() |
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
12 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. 13 Run the appropriate online diagnostic test. If the tests fail, see "Getting Help" on page 167. 14 For each expansion card you removed in step 10, perform the following steps: a Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. b Open the system. See "Opening and Closing the System" on page 66. c Reinstall one of the expansion cards. d Close the system. See "Opening and Closing the System" on page 66. e Run the appropriate diagnostic test. If the tests fail, see "Getting Help" on page 167. Troubleshooting the Microprocessors Problem • Error message indicates a processor problem. • Front-panel status LCD indicates a problem with the processors or system board. • A heat sink is not installed for each processor. Action CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Run the appropriate online diagnostics test. See "Using Server Administrator Diagnostics" on page 153. 2 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 150 Troubleshooting Your System
![](/manual_guide/products/dell-powervault-dl2000-dl2000-hardware-owners-manual-d9c9f83/150.png)