Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 31

Table 1-6. LCD Status Messages (continued) Code Text Causes Corrective Actions E2119 Fatal SB Mem CRC One of the connections in See "Troubleshooting the FBD memory System Memory" on subsystem link on the page 142. Southbound side has failed. I1910 Intrusion System cover has been removed. Information only. I1911 >3 ERRs Chk Log LCD overflow message. Check the SEL for details A maximum of three error on the events. messages can display sequentially on the LCD. The fourth message displays as the standard overflow message. I1912 SEL Full System Event Log is full of Clear the log by deleting events, and is unable to log event entries. any more events. NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary" on page 169. Solving Problems Described by LCD Status Messages The code and text on the LCD can often specify a very precise fault condition that is easily corrected. For example, if the code E1418 CPU_1_Presence appears, you know that a microprocessor is not installed in socket 1. In contrast, you might be able to determine the problem if multiple related errors occur. For example, if you receive a series of messages indicating multiple voltage faults, you might determine that the problem is a failing power supply. Removing LCD Status Messages For faults associated with sensors, such as temperature, voltage, fans, and so on, the LCD message is automatically removed when that sensor returns to a normal state. For example, if temperature for a component goes out of range, About Your System 31