Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 37
address, value, System Memory
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Table 1-7. System Messages (continued) Message Causes Corrective Actions Manufacturing mode System is in detected manufacturing mode. Reboot to take the system out of manufacturing mode. MEMBIST failure The following DIMM/rank has been disabled by BIOS: DIMM x Rank y Faulty memory module(s). See "Troubleshooting System Memory" on page 142. Memory address line failure at address, read value expecting value Faulty or improperly See "Troubleshooting installed memory modules. System Memory" on page 142. Memory double word logic failure at address, read value expecting value Memory odd/even logic failure at address, read value expecting value Memory write/read failure at address, read value expecting value Memory tests terminated by keystroke. POST memory test Information only. terminated by pressing the spacebar. About Your System 37