Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 83
Cable Routing, Removing the Cable Retention Bracket
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Cable Routing Cables that extend through the system front-to-back are routed along a cable path within the interior right wall of the system chassis. The cables are secured by a cable retention bracket that attaches to the inner wall. Removing the Cable Retention Bracket 1 Remove the cooling shroud. See "Removing the Cooling Shroud." 2 Remove the cooling fan bracket. See "Removing the Fan Bracket." 3 Press outward on the blue release latch on the cable retention bracket and slide the bracket back until the tabs at the bottom of the bracket clear the chassis. See Figure 3-11. 4 Lift the cable retention bracket off the chassis wall. Installing System Components 83
Installing System Components
83
Cable Routing
Cables that extend through the system front-to-back are routed along a cable
path within the interior right wall of the system chassis. The cables are
secured by a cable retention bracket that attaches to the inner wall.
Removing the Cable Retention Bracket
1
Remove the cooling shroud. See "Removing the Cooling Shroud."
2
Remove the cooling fan bracket. See "Removing the Fan Bracket."
3
Press outward on the blue release latch on the cable retention bracket and
slide the bracket back until the tabs at the bottom of the bracket clear the
chassis. See Figure 3-11.
4
Lift the cable retention bracket off the chassis wall.