Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 82
Replacing the Fan Bracket, Controller Daughter Card
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Figure 3-10. Removing and Installing the Fan Bracket 3 2 4 1 5 1 release latch 3 plastic clip 5 tabs (2) 2 fan bracket 4 fan bracket slot in power supply cage Replacing the Fan Bracket 1 Insert the two tabs on the right side of the fan bracket into the two slots on the system board tray. 2 Gently rotate the left end of the fan bracket downward into the system until the release latch and plastic clip fully engage. 3 Reinstall the SAS controller daughter card. See "Installing a SAS Controller Daughter Card" on page 85. 4 Replace the fans in the fan bracket. See "Replacing a Cooling Fan" on page 79. 5 Close the system. See "Closing the System" on page 67. 6 Reconnect the system to the electrical outlet and turn on the system and attached peripherals. 82 Installing System Components