Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 68
Hard Drives
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Figure 3-3. Removing the Cover 1 2 3 1 latch 3 alignment J hooks 2 latch release lock Hard Drives This subsection describes how to install and configure SATA hard drives in the system's internal hard-drive bays. Your system features up to four SATA 3.5-inch hard drives. All drives connect to the system board through the SAS backplane board. See "SAS Backplane Board Connectors" on page 161 for information on these backplane options. NOTE: Depending on the hard drive configuration you ordered, your hard drive(s) may come with a drive interposer that allows your SATA drive to attach to the SAS connector on the backplane. 68 Installing System Components
68
Installing System Components
Figure 3-3.
Removing the Cover
Hard Drives
This subsection describes how to install and configure SATA hard drives in
the system's internal hard-drive bays. Your system features up to four SATA
3.5-inch hard drives. All drives connect to the system board through the SAS
backplane board. See "SAS Backplane Board Connectors" on page 161 for
information on these backplane options.
NOTE:
Depending on the hard drive configuration you ordered, your hard drive(s)
may come with a drive interposer that allows your SATA drive to attach to the SAS
connector on the backplane.
1
latch
2
latch release lock
3
alignment J hooks
1
3
2