Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 87
SAS Controller Daughter Card Cabling Guidelines, Removing a SAS Controller Daughter Card
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
SAS Controller Daughter Card Cabling Guidelines Figure 3-13. SAS Controller Daughter Card Cabling With 3.5-inch x4 Backplane 2 3 1 4 5 1 SAS controller 0 3 SAS controller 1 5 3.5-inch x4 backplane 2 SAS controller daughter card 4 SAS backplane A Removing a SAS Controller Daughter Card 1 Disconnect the control panel cable. See "Removing the Control Panel Assembly" on page 122 2 Disconnect any SAS cables from the card. 3 Gently press down on the release tab while sliding the SAS controller daughter card in its tray away from the sideplane connector, freeing the chassis slots on the tray from the chassis hooks, and lifting the card from the system. See Figure 3-12. Configuring the Boot Device NOTE: System boot is not supported from an external device attached to a SAS or SCSI adapter. See support.dell.com for the latest support information about booting from external devices. Installing System Components 87