Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 72
Replacing a Hard-Drive Carrier, Removing a Hard Drive From a Hard-Drive Carrier
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Replacing a Hard-Drive Carrier Removing a Hard Drive From a Hard-Drive Carrier 1 If you are removing a SATA hard drive from a SATAu drive carrier, remove the interposer card: a Viewing the hard drive carrier from the rear, locate the release lever on the left end of the interposer card. b Push the lever away from the carrier rail to release the left end of the card. c Rotate the left end away from the hard drive to release the connector. d Pull the right end of the interposer card clear of the slots in the carrier rail. 2 Remove the four screws from the slide rails on the hard-drive carrier and separate the hard drive from the carrier. Installing a SATA Hard Drive Into a SATA Drive Carrier NOTE: SATA hard drives that connect directly to the SAS backplane must be installed in SATA drive carriers (labeled "SATA"). 1 Insert the SATA hard drive into the hard-drive carrier with the connector end of the drive at the rear. See Figure 3-5. 2 Align the screw holes on the hard drive with the holes on the hard-drive carrier. See Figure 3-5. 3 Attach the four screws to secure the hard drive to the hard-drive carrier. See Figure 3-5. 72 Installing System Components