Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 35
Error: Incorrect, Run the System Setup
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Table 1-7. System Messages (continued) Message Causes Corrective Actions Diskette drive n seek failure Incorrect configuration settings in the System Setup program. Run the System Setup program to correct the settings. See "Using the System Setup Program" on page 45. Faulty or improperly installed diskette drive. Replace the diskette. If the problem persists, see "Troubleshooting an Optical Drive" on page 143. Loose tape drive interface Reseat tape drive interface cable, or loose power cable. cable, or power cable. If the problem persists, see "Troubleshooting an Optical Drive" on page 143. Diskette read failure Faulty or improperly inserted diskette or tape drive. Replace the diskette. See "Troubleshooting an Optical Drive" on page 143. Diskette subsystem Faulty or improperly reset failed installed diskette or tape drive. Replace the diskette or tape. If the problem persists, see "Troubleshooting an Optical Drive" on page 143. Drive not ready Diskette missing from or improperly inserted in diskette drive. Replace the diskette. If the problem persists, see "Troubleshooting an Optical Drive" on page 143. Error: Incorrect memory configuration. DIMMs must be installed in pairs of matched memory size, speed, and technology. Mismatched or Ensure that all pairs of unmatched DIMMs memory modules are of the installed; faulty or same type and size and that improperly seated memory they are properly installed. module(s). See "System Memory" on page 100. If the problem persists, see "Troubleshooting System Memory" on page 142. About Your System 35