Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 41
The following DIMM, Ensure that only ECC FBD1
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Table 1-7. System Messages (continued) Message Causes Corrective Actions The amount of system memory has changed Memory has been added or If memory has been added removed or a memory or removed, this message is module may be faulty. informative and can be ignored. If memory has not been added or removed, check the SEL to determine if single-bit or multi-bit errors were detected and replace the faulty memory module. See "Troubleshooting System Memory" on page 142. Time-of-day clock Faulty battery or faulty stopped chip. See "Troubleshooting the System Battery" on page 138. The following DIMM pair is not compatible with the memory controller: DIMM x and DIMM y The specified DIMM(s) are incompatible with the system. Ensure that only Dellqualified memory is used. Dell recommends purchasing memory upgrade kits directly from www.dell.com or your Dell sales agent to ensure compatibility. The following DIMMs are not compatible: DIMM x and DIMM y The specified DIMM(s) are incompatible with the system. Ensure that only ECC FBD1 memory is used. Dell recommends purchasing memory upgrade kits directly from www.dell.com or your Dell sales agent to ensure compatibility. Time-of-day not set - please run SETUP program Incorrect Time or Date settings; faulty system battery. Check the Time and Date settings. See "Using the System Setup Program" on page 45. If the problem persists, replace the system battery. See "System Battery" on page 110. About Your System 41