Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 80
Cooling Shroud, Removing the Cooling Shroud
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Cooling Shroud The cooling shroud produces and directs airflow over the system memory modules. CAUTION: The DIMMs are hot to the touch for some time after the system has been powered down. Allow the DIMMs to cool before handling them. NOTICE: Never operate your system with the memory cooling shroud removed. Overheating of the system can develop quickly resulting in a shutdown of the system and the loss of data. Removing the Cooling Shroud 1 The cooling shroud is secured with a latch at the end of the shroud. Release the latch by pulling it towards the outside wall of the chassis. See Figure 3-9. 2 Rotate the shroud upward and toward the front of the system on its hinges, and then lift the shroud out of the system. Figure 3-9. Removing and Installing the Cooling Shroud 2 3 1 4 5 1 shroud pivots (2) 3 release latch 5 fan bracket 2 cooling shroud 4 shroud hinges (2) 80 Installing System Components