Dell PowerVault DL2000 DL2000 Hardware Owner's Manual - Page 123
Installing the Control Panel Assembly, Affix the display module label to the display module.
View all Dell PowerVault DL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Figure 3-27. Control Panel Removal 4 3 2 1 5 6 7 1 display module label 3 display module 5 control panel cable 7 control-panel circuit board securing screws (3) 2 display module securing screws (2) 4 display module cable 6 control panel circuit board Installing the Control Panel Assembly 1 Insert the display module into the chassis cutout and secure with the two Torx screws. 2 Affix the display module label to the display module. 3 Install the control panel board in the system chassis and secure with the three Phillips screws. See Figure 3-27. 4 Connect the display module cable to the control panel board. See Figure 3-27. Installing System Components 123
Installing System Components
123
Figure 3-27.
Control Panel Removal
Installing the Control Panel Assembly
1
Insert the display module into the chassis cutout and secure with the two
Torx screws.
2
Affix the display module label to the display module.
3
Install the control panel board in the system chassis and secure with the
three Phillips screws. See Figure 3-27.
4
Connect the display module cable to the control panel board. See
Figure 3-27.
1
display module label
2
display module securing screws (2)
3
display module
4
display module cable
5
control panel cable
6
control panel circuit board
7
control-panel circuit board
securing screws (3)
5
6
2
7
1
3
4