Dell PowerVault DR6000 Owners Manual - Page 22
System Profile Settings Screen, Monitor/Mwait
![]() |
View all Dell PowerVault DR6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Menu Item Remote Terminal Type Redirection After Boot Description attempt fails and the value must not be changed. By default, the Failsafe Baud Rate option is set to 11520. Allows you to set the remote console terminal type. By default, the Remote Terminal Type option is set to VT 100/VT 220. Allows you to enable or disable to the BIOS console redirection when the operating system is loaded. By default, the Redirection After Boot option is set to Enabled. System Profile Settings Screen Menu Item System Profile CPU Power Management Memory Frequency Turbo Boost C1E C States Monitor/Mwait Memory Patrol Scrub Memory Refresh Rate Description Allows you to set the system profile. If you set the System Profile option to a mode other than Custom, the BIOS automatically sets the rest of the options. You can only change the rest of the options if the mode is set to Custom. By default, the System Profile option is set to Performance Per Watt Optimized (DAPC). DAPC is Dell Active Power Controller. NOTE: The following parameters are available only when the System Profile is set to Custom. Allows you to set the CPU power management. By default, the CPU Power Management option is set to System DBPM (DAPC). DBPM is Demand-Based Power Management. Allows you to set the memory frequency. By default, the Memory Frequency option is set to Maximum Performance. Allows you to enable or disable the processor to operate in turbo boost mode. By default, the Turbo Boost option is set to Enabled. Allows you to enable or disable the processor to switch to a minimum performance state when it is idle. By default, the C1E option is set to Enabled. Allows you to enable or disable the processor to operate in all available power states. By default, the C States option is set to Enabled. Allows you to enable Monitor/Mwait instructions in the processor. By default, the Monitor/Mwait option is set to Enabled for all system profiles, except Custom. NOTE: This option can be disabled only if the C States option in Custom mode is disabled. NOTE: When C States is enabled in Custom mode, changing the Monitor/ Mwait setting does not impact system power/performance. Allows you to set the memory patrol scrub frequency. By default, the Memory Patrol Scrub option is set to Standard. Allows you to set the memory refresh rate. By default, the Memory Refresh Rate option is set to 1x. 22
![](/manual_guide/products/dell-powervault-dr6000-owners-manual-ab3571d/22.png)