Dell Vostro 1420 Owners Manual - Page 176
Replacing the Memory Module, Align the notch in the module edge connector with the tab in
View all Dell Vostro 1420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
1 2 1 memory module 2 securing clips (2) Replacing the Memory Module NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1 Align the notch in the module edge connector with the tab in the connector slot. 2 Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. NOTE: If the memory module is not installed properly, the computer may not boot. No error message indicates this failure. 176 Adding and Replacing Parts
176
Adding and Replacing Parts
Replacing the Memory Module
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1
Align the notch in the module edge connector with the tab in the
connector slot.
2
Slide the module firmly into the slot at a 45-degree angle, and rotate the
module down until it clicks into place. If you do not feel the click, remove
the module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer may not boot.
No error message indicates this failure.
1
memory module
2
securing clips (2)
2
1