Dell Vostro 1420 Owners Manual - Page 181
Replacing a WLAN Card, WLAN at a 45-degree angle by aligning the notch on the WLAN card
View all Dell Vostro 1420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
6 Lift the WLAN card from the computer at a 45-degree angle. Replacing a WLAN Card NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. NOTICE: To avoid damage to the WLAN card, never place cables under the card. 1 Insert the WLAN card connector into the system board connector labeled "WLAN" at a 45-degree angle by aligning the notch on the WLAN card to the slot on the system board connector. 2 Press down the other end of the WLAN card and tighten the screw securing the card to the system board. Adding and Replacing Parts 181
Adding and Replacing Parts
181
6
Lift the WLAN card from the computer at a 45-degree angle.
Replacing a WLAN Card
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE:
To avoid damage to the WLAN card, never place cables under the card.
1
Insert the
WLAN
card connector into the system board connector labeled
"WLAN" at a 45-degree angle by aligning the notch on the WLAN card to
the slot on the system board connector.
2
Press down the other end of the WLAN card and tighten the screw
securing the card to the system board.