Edimax EW-7238RPD Manual - Page 29
II-2. WPS Setup
View all Edimax EW-7238RPD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
III-3. WPS Settings WPS (Wi-Fi Protected Setup) is a simple way to establish connections between WPS compatible devices. WPS devices feature a WPS function which can be activated by pushing a WPS button on the device or from within the device's firmware/configuration interface. When WPS is activated in the correct manner and at the correct time for two compatible devices, they will automatically connect. The WPS Settings page displays settings for WPS between your extender and a wireless client. For WPS Setup between your extender and router/access point, please refer back to (II-2. WPS Setup). The wireless extender supports two types of WPS for wireless clients: PBC (Push Button Configuration) and PIN code. For PBC you can activate WPS on the wireless extender by clicking the "Start PBC" button on the screen. Note: Click the "Start PBC" button to activate WPS - do not push the WPS/Reset button on the extender. PIN code setup varies slightly in that it requires you to manually enter a PIN code into each device via the WPS Settings before activating WPS. Note: Depending on your WPS Settings selection (above), either 2.4G or 5G Wi-Fi Protected Setup Information will be displayed on your screen. Both are shown below for demonstration purposes. 29