Edimax EW-7238RPD Manual - Page 31
I-3. LED Status
View all Edimax EW-7238RPD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
device (refer to client device's user manual for guidance on how to do so) in order to establish a connection. The WPS LED ( ) will display ON to indicate a successful connection, and will remain ON for 5 minutes (see I-3. LED Status). III-4. Advanced Settings When you select "Advanced Settings" you will see the screen below. A submenu with four furthur categories you can select will also be displayed. Tx Power You can adjust the level of wireless output power as a percentage. Depending on the size of your location and required coverage, you may not require 100% output power. Reducing the output power can enhance security since your Wi-Fi signal will not extend to potential malicious/unknown users in distant areas. Enable LED Off Mode Check this box to enable "LED Off Mode" which allows you to select "Turn off all LED indicators" or "Turn off all LED indicators except the power LED" accordingly. Click "APPLY" to make changes take effect. The following message will appear: 31