Fluke 1586A/2DS Product Manual - Page 111
Introduction, Clean the Product, Replace the Fuse
View all Fluke 1586A/2DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
6 Maintenance and Care Introduction Introduction This section supplies information on how to clean the Product, reset the memory, and replace the fuse in the rear of the Product. Clean the Product To clean the Product, wipe the instrument with a cloth that is lightly dampened with water or mild detergent. Do not use aromatic hydrocarbons, chlorinated solvents, or methanol based fluids. Replace the Fuse The Product has a product fuse that protects from overcurrent. Each voltage selection requires a specific fuse. See Table 6-1. Warning To prevent possible electrical shock, fire, or personal injury, use only specified replacement parts. Table 6-1. Fuses Voltage Selector Fuse Fluke Part Number 100 V 0.25 A, 250 V (slow blow) 166306 120 V 0.25 A, 250 V (slow blow) 166306 220 V 0.125 A, 250 V (slow blow) 166488 240 V 0.125 A, 250 V (slow blow) 166488 To replace the fuses (see Figure 6-1): 1. Disconnect the mains-power cord from the power-entry module. 2. Open the power entry module and remove the fuse holder. 3. Replace the fuses with exact replacements as listed in Table 6-1. 6-3 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664