Fluke 1586A/2DS Product Manual - Page 98
Memory Consumption for Recorded Data, Open and View Measurement Data on a PC
View all Fluke 1586A/2DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
1586A Users Manual Memory Consumption for Recorded Data The amount of memory consumed by recorded scan data varies based on how many channels are recorded and the number of scan cycles completed. See the information in Table 4-5 to estimate memory consumption. For front-panel DMM recording, it takes approximately 400 hours to consume 1 GB of memory. Table 4-5. Scan Data Memory Usage Channels Recorded Bytes Used Per Scan Approximate Scans Cycles to Reach 1 GB 20 Channels 320 bytes 3,125,000 scans cycles 40 Channels 600 bytes 1,666,000 scans cycles 60 Channels 880 bytes 1,136,000 scan cycles Open and View Measurement Data on a PC After a recorded scan is finished, the data file can be transferred to a PC where the results can be viewed in Microsoft Excel. To open the a data file on a PC: 1. Put the data on the USB drive to be transferred to the PC. If the Data file is on the internal memory, copy the file to the USB drive. If the scan was set up to record directly to the USB, the data file is already on the USB drive and no action is necessary. 2. Remove the USB drive from the front panel and insert it into a USB port on the PC. 3. Open the Start menu and search for the word "Computer" to open the Computer Drive manager (see image below). 4. Find the USB drive and double-click on it to explore the contents. 5. Navigate to the data folder as follows (see Figure 4-9 for an example of the folder structure): a. Double-click on the fluke folder. b. Double-click on the 1586A folder. c. Double-click on the serial number of the Product used to record the data. In the example, 12345678 is the serial number of the Product. 4-20 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664