Fluke 1586A/2DS Product Manual - Page 118
Table 7-1. Error Messages cont., Error Code, Error Message, Causes and Solutions, Cause, Solution
View all Fluke 1586A/2DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
1586A Users Manual Error Code Error -161 Error -151 Error -144 Error -123 Error -113 Error -109 Error -108 Error -104 Table 7-1. Error Messages (cont.) Error Message Invalid block data Invalid string data Character data too long Exponent too large Undefined header Missing parameter Parameter not allowed Data type error Causes and Solutions Cause: A block data element was expected, but was invalid. For example, an END message was received before the length was satisfied. Solution: Check the command and try again. Cause: An invalid character string was received. Solution: Check to see if the character string in is enclosed in quotation marks and verify that the string contains valid ASCII characters. Cause: The character data element contains more than 250 characters. Solution: Check the parameter value and try again. Cause: A numeric parameter was found whose exponent was too large for this command. Solution: Check the parameter value and try again. Cause: A command was received that is not valid for this instrument. Solution: The command entered could be misspelled or not a valid command. If the shortened form of a command is used, remember that it can contain up to four letters. Also check for duplicate colons. Cause: Fewer parameters were received than expected for this command. Solution: One or more parameters that are required for this command have been omitted. Check the parameter value and try again. Cause: More parameters were received than expected for this command. Solution: An extra parameter could have been added to a command that does not require a parameter. Check the parameter value and try again. Cause: Invalid data type was found in the command string. Solution: Check the parameter value and try again. 7-4 MyFlukeStore Shop for Fluke products online at: www. .com 1.888.610.7664