Fluke 726 FE 726 Users Manual - Page 42
Sourcing Other Electrical Parameters, for frequency,
View all Fluke 726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
726 Users Manual Sourcing Other Electrical Parameters Volts, ohms, and frequency are also sourced and shown in the lower display. To select an electrical sourcing function, proceed as follows: 1. Connect the test leads as shown in Figure 15, depending on the source function. M 2. If necessary, press for SOURCE mode. 3. Press V for dc voltage, or K for frequency, and R for resistance. 4. Enter the desired output value by pressing X and W keys. Press Y and Z to select a different digit to change. 32
726
Users Manual
32
Sourcing Other Electrical Parameters
Volts, ohms, and frequency are also sourced and shown
in the lower display.
To select an electrical sourcing function, proceed as
follows:
1.
Connect the test leads as shown in Figure 15,
depending on the source function.
2.
If necessary, press
M
for SOURCE mode.
3.
Press
V
for dc voltage, or
K
for frequency, and
R
for resistance.
4.
Enter the desired output value by pressing
X
and
W
keys. Press
Y
and
Z
to select a different digit to
change.