Fluke 726 FE 726 Users Manual - Page 44
Simulating Thermocouples, Do not try to force a miniplug into the wrong, polarization.
![]() |
View all Fluke 726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
726 Users Manual Simulating Thermocouples Connect the Calibrator TC input/output to the instrument under test with the thermocouple wire and the appropriate thermocouple mini-connector (polarized thermocouple plug with flat, in-line blades spaced 7.9 mm [0.312 in] center to center). One pin is wider than the other. W Caution Do not try to force a miniplug into the wrong polarization. Figure 16 shows this connection. Proceed as follows to simulate a thermocouple: 1. Attach the thermocouple leads to the appropriate TC miniplug, then to the TC input/output as shown in Figure 16. M 2. If necessary, press for SOURCE mode. 3. Press T for the TC display. If desired, continue pressing this key to select the desired thermocouple type. 4. Enter the temperature you want by pressing X and W keys. Press Y and Z to select a different digit to edit. 34
![](/manual_guide/products/fluke-726-fe-726-users-manual-2995f0a/44.png)