Garmin Astro Astro and DC 40 Owner's Manual - Page 55
Installing the Belt Clip, Replacing the DC 40 Collar, Align the new collar with
![]() |
UPC - 753759063931
View all Garmin Astro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installing the Belt Clip 1. Place the belt clip button on the connector located on the back of the device. 2 Turn the button clockwise to tighten it securely. 3. Slide the belt clip onto the button. Appendix Replacing the DC 40 Collar You must provide your own Phillips screwdriver to replace the DC 40 collar. 1. Carefully cut the zip tie that secures the VHF antenna to the collar. 2. Remove the two screws on the back plate of the DC 40. 3. Lift off the mounting plate. 4. Remove the old collar. 5. Align the new collar with the DC 40. The buckle should be on the side opposite of the power button. 6. Replace the mounting plate and screws. 7. Replace the zip tie that secures the VHF antenna to the collar. Trim the zip tie and any sharp edges. Astro and DC 40 Owner's Manual 51
![](/manual_guide/products/garmin-astro-astro-dc-40-owners-manual-7b422ff/55.png)