Garmin dezlCam OTR710 Owners Manual - Page 16
Dash Cam, Aligning the Camera, Dash Cam Recording, Saving a Dash Cam Recording
View all Garmin dezlCam OTR710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Dash Cam Aligning the Camera WARNING Do not attempt to align the camera while driving because doing so can cause distraction that could lead to an accident resulting in serious personal injury or death. Advanced driver assistance features may not perform properly if the camera is not aligned. You should align the dash camera each time you mount or reposition the device. 1 Select > Dash Cam > Camera Placement. 2 Select Horizontal Placement, and select the horizontal location of your device on the windshield. 3 Select Vehicle Height, and select your vehicle type. 4 Select Alignment. 5 Tilt the device and turn the camera left or right to align the camera. The crosshairs should point straight ahead, and the horizon line should be centered between the top and bottom of the screen. Dash Cam Recording NOTICE Some jurisdictions may prohibit or regulate recording audio and video, or taking photographs. Jurisdictions may require that all parties have knowledge of the recording and provide consent before you record audio and video or take photographs. It is your responsibility to know and comply with all laws, regulations, and any other restrictions in your jurisdiction. The dash cam records video to the camera memory card. By default, the device immediately starts recording video when it turns on, and it continues recording until it is turned off. If the memory card is full, the device automatically deletes the oldest unsaved video to create space for new video. When the option to promptly delete unsaved video is enabled, the device continually deletes unsaved video more than three minutes old and deletes all unsaved video each time it is powered off. You can enable or disable this feature in the camera settings (Dash Cam Settings, page 60). You can save a video recording to prevent it from being overwritten or deleted. Saving a Dash Cam Recording You can save a portion of the recorded video to prevent it from being overwritten by new video. By default, the device uses a sensor to detect possible accidental collisions and saves video footage before, during, and after the detected event. You can also manually save video at any time. 1 While the dash cam is recording, select Dash Cam > . The device saves the video footage before, during, and after you select . 2 Select again to extend the saved recording time (optional). A message indicates the video is saving. Stopping or Starting Dash Camera Recording 1 Select Dash Cam. 2 Select an option: • To stop recording, select . TIP: By default, recording starts automatically the next time you turn on the device. You can disable this option in the camera settings (Dash Cam Settings, page 60). • To start recording, select . 10 Dash Cam