Garmin dezlCam OTR710 Owners Manual - Page 78
Connecting Accessories, Use 12 AWG 4 mm
View all Garmin dezlCam OTR710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Connecting Accessories NOTICE Do not use the device to control or power a winch. Failure to follow this notice could cause damage to your vehicle or your device. Do not connect a power source to an accessory output terminal. Failure to follow this notice could cause damage to your vehicle or your device. Accessory requirements: • Verify the amperage rating of each accessory before wiring it to the Garmin PowerSwitch device. The device supports accessories up to 30 A for each channel and a maximum of 100 A for the entire system. • Use 10 AWG (6 mm2) wires for accessories that use 20 to 30 A. • Use 12 AWG (4 mm2) wires for accessories that use 10 to 20 A. • Use 14 AWG (2.5 mm2) wires for accessories that use less than 10 A. • Use the appropriate size terminals for all accessory connections. • Crimp all terminal connectors securely. 1 Connect the positive wire from the accessory to one of the accessory terminals on the Garmin PowerSwitch device. 2 Connect the negative or ground wire to an unpainted ground stud on the vehicle frame, to a ground distribution block, or directly to the negative terminal on the battery. 72 Appendix