HP Brocade 8/12c Brocade Fabric OS Troubleshooting and Diagnostics Guide v6.2. - Page 115
Working With Diagnostic Features, In this About Fabric OS diagnostics, Diagnostic information
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Chapter Working With Diagnostic Features 13 In this chapter •About Fabric OS diagnostics 99 •Diagnostic information 99 •Power-on self test 100 •Switch status 102 •Chassis-level diagnostics 104 •Port information 105 •Equipment status 108 •System message log 110 •Port log 111 •Syslogd configuration 112 •Automatic trace dump transfers 114 •Diagnostic tests not supported by M-EOS 9.6.2 and FOS 6.0 116 About Fabric OS diagnostics The purpose of the diagnostic subsystem is to evaluate the integrity of the system hardware. Diagnostics are invoked in the one of the following ways: • Automatically during the power-on self test (POST). • Automatically on an individual blade whenever it is installed into a director chassis. • Manually using Fabric OS CLI commands. The error messages generated during these test activities are sent to the serial console and system message logs, whose output formats may differ slightly. Use the diagHelp command to receive a list of all available diagnostic commands. See the Fabric OS Command Reference for a complete description of each command. Diagnostic information On the switch you can enter the supportShow command to dump important diagnostic and status information to the session screen, where you can review it or capture its data. If you are using a Telnet client, you may have to set up the client to capture the data prior to opening the session Fabric OS Troubleshooting and Diagnostics Guide 99 53-1001187-01