HP Brocade 8/12c Brocade Fabric OS Troubleshooting and Diagnostics Guide v6.2. - Page 25
Gathering additional information, Storage software such as EMC Control Center, Veritas SPC, etc.
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Building a case for your switch support provider 1 • Storage information: Disk/tape type Disk/tape firmware level Controller type Controller firmware level Configuration settings Storage software (such as EMC Control Center, Veritas SPC, etc.) 8. If this is a Brocade 48000, Brocade DCX or DCX-4S enterprise-class platform, are the CPs in-sync? Yes or no. Use the haShow command to determine the answer. 9. List out what and when were the last actions or changes made to the switch, the fabric, and the SAN or metaSAN? TABLE 3 Environmental changes Type of Change Date when change occurred Gathering additional information Below are features that require you to gather additional information. The additional information is necessary in order for your switch support provider to effectively and efficiently troubleshoot your issue. Refer to the chapter specified for the commands whose data you need to capture. • Configurations, see Chapter 3, "Connections Issues". • Firmwaredownload, see Chapter 5, "FirmwareDownload Errors". • Trunking, see Chapter 8, "ISL Trunking Issues". • Zoning, see Chapter 9, "Zone Issues". • FCIP tunnels, see Chapter 10, "FCIP Issues". • FICON, see Chapter 11, "FICON Fabric Issues". Fabric OS Troubleshooting and Diagnostics Guide 9 53-1001187-01