HP Brocade 8/12c Brocade Fabric OS Troubleshooting and Diagnostics Guide v6.2. - Page 121
Spinfab and porttest, Port information, Viewing the status of a port
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Port information 13 • chassisEnable - enables all the ports in the chassis • bladeDisable - disables all the ports in the blade • bladeEnable - enables all the ports in the blade Spinfab and porttest If Virtual Fabrics-mode is enabled, the commands spinFab and portTest are online diagnostics that are available only on the default switch. These tests are not supported in the logical switch context. If Virtual Fabrics-mode is not enabled, then these commands are available to the switch. Port information Use the following instructions to view information about ports and to help diagnose if your switch is experiencing port problems. Viewing the status of a port 1. Connect to the switch and log in as admin. 2. Enter the portShow [slot/] port command, specifying the number that corresponds to the port you are troubleshooting. In this example, the status of port 10 is shown: brcd300:admin> portshow 10 portName: portHealth: HEALTHY Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x20b03 PRESENT ACTIVE F_PORT G_PORT U_PORT LOGICAL_ONLINE LOGIN NOELP ACCEPT FLOGI portType: 18.0 POD Port: Port is licensed portState: 1Online portPhys: 6In_Sync portScn: 32F_Port port generation number: 14 portId: 020a00 portIfId: 4302000b portWwn: 20:0a:00:05:1e:41:4a:a5 portWwn of device(s) connected: 21:00:00:e0:8b:05:e0:b1 Distance: normal portSpeed: N2Gbps LE domain: 0 FC Fastwrite: OFF Interrupts: 0 Link_failure: 0 Frjt: 0 Unknown: 0 Loss_of_sync: 3 Fbsy: 0 Lli: 18 Loss_of_sig: 6 Proc_rqrd: 161 Protocol_err: 0 Timed_out: 0 Invalid_word: 563851 Rx_flushed: 0 Invalid_crc: 0 Tx_unavail: 0 Delim_err: 0 Fabric OS Troubleshooting and Diagnostics Guide 105 53-1001187-01