HP Brocade 8/12c Brocade Fabric OS Troubleshooting and Diagnostics Guide v6.2. - Page 59
FirmwareDownload Errors, In this Blade troubleshooting tips
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
FirmwareDownload Errors Chapter 5 In this chapter •Blade troubleshooting tips 43 •Firmware download issues 44 •Troubleshooting firmwareDownload 46 •USB error handling 46 •Considerations for downgrading firmware 47 Blade troubleshooting tips This chapter refers to the following specific types of blades inserted into either the Brocade 48000 director or Brocade DCX or DCX-4S Backbone: • FC blades or port blades contain only Fibre Channel ports: Brocade FC4-16/32/48, FC10-6, and FC8-16/32/48. • AP blades contain extra processors and specialized ports: Brocade FR4-18i and FC4-16IP, and FA4-18. • CP blades have a control processor (CP) used to control the entire switch; they can be inserted only into slots 5 and 6 on the Brocade 48000, slots 6 and 7 on the Brocade DCX, and slots 4 and 5 on the Brocade DCX-4S. • CORE8 and CR4S-8 core blades provide ICL functionality between two Brocade DCX Backbones. CORE8 blades can be inserted only into slots 5 and 8 on the Brocade DCX. CR4S-8 blades can be inserted only into slots 3 and 6 on the Brocade DCX-4S. Typically, issues detected during firmware download to AP blades do not require recovery actions on your part. If you experience frequent failovers between CPs that have different versions of firmware, then you may notice multiple blade firmware downloads and a longer startup time. ATTENTION Brocade 48000 with FC8-16 blades: If you are running Fabric OS v6.0, then you cannot downgrade to earlier versions without removing the blades. Brocade DCX Director with FC8-16/32/48 blades: If you are running Fabric v6.1.0, then you cannot downgrade to pre-Fabric OS v6.0.0 versions as they are not supported on this director. Fabric OS Troubleshooting and Diagnostics Guide 43 53-1001187-01