HP Brocade 8/12c Brocade Fabric OS Troubleshooting and Diagnostics Guide v6.2. - Page 86
Correcting a fabric merge problem quickly, ATTENTION, TABLE 12
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
9 Zone conflicts ATTENTION Be careful using the cfgClear command because it deletes the defined configuration. Table 12 summarizes commands that are useful for debugging zoning issues. TABLE 12 Commands for debugging zoning Command Function aliCreate aliDelete cfgCreate cfgShow cfgDisable cfgEnable cfgSave cfgTransAbort cfgTransShow defZone licenseShow switchShow zoneAdd zoneCreate zoneHelp zoneShow Use to create a zone alias. Use to delete a zone alias. Use to create a zone configuration. Displays zoning configuration. Disables the active (effective) configuration Use to enable and activate (make effective) the specified configuration. Use to save changes to the zone configuration database. Use to abort the current zoning transaction without committing it. Use to display the ID of the current zoning transaction. Sets the default zone access mode to No Access, initializes a zoning transaction (if one is not already in progress), and creates the reserved zoning objects. Displays current license keys and associated (licensed) products. Displays currently enabled configuration and any E_Port segmentations resulting from zone conflicts. Use to add a member to an existing zone. Use to create a zone. Before a zone becomes active, the cfgSave and cfgEnable commands must be used. Displays help information for zone commands. Displays zone information. For more information about setting up zoning on your switch, refer to the Fabric OS Administrator's Guide. Also, see the Fabric OS Command Reference for details about zoning commands. You can correct zone conflicts by using the cfgClear command to clear the zoning database. ATTENTION The cfgClear command is a disruptive procedure. Correcting a fabric merge problem quickly 1. Determine which switches have the incorrect zoning configuration; then, log in to the switches as admin. 2. Enter the switchDisable command on all problem switches. 3. Enter the cfgDisable command on each switch. 4. Enter the cfgClear command on each switch. 5. Enter the cfgSave command on each switch to commit the change. 70 Fabric OS Troubleshooting and Diagnostics Guide 53-1001187-01