HP Brocade 8/12c Fabric OS Encryption Administrator's Guide - Page 166
Alternately use, Enable the zone configuration.
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
3 Zoning considerations Permanent Port Name: 10:00:00:00:c9:2b:c9:3a Port Index: 6 Share Area: No Device Shared in Other AD: No Redirect: No The Local Name Server has 1 entry } The nsshow command shows all devices on the switch, and the output can be lengthy. To retrieve only the initiator PWWN, do a pattern search of the output based on the initiator Port ID (a hex number). In the following example, The PID is 010600, where 01 indicates the domain and 06 the port number. FabricAdmin:switch>nsshow | grep 0106 N 010600; 2,3;10:00:00:00:c9:2b:c9:3a;20:00:00:00:c9:2b:c9:3a; na 3. Determine the target PWWN. Enter the nsscamshow command to review the remote switch information. In the following example, the port name 20:0c:00:06:2b:0f:72:6d is the target PWWN. FabricAdmin:switch>nscamshow nscamshow for remote switches: Switch entry for 2 state rev owner known v611 0xfffc01 Device list: count 13 Type Pid COS PortName NodeName NL 0208d3; 3;20:0c:00:06:2b:0f:72:6d;20:00:00:06:2b:0f:72:6d; FC4s: FCP PortSymb: [55] "LSI7404XP-LC BR A.1 03-01081-02D FW:01.03.06 Port 1 " Fabric Port Name: 20:08:00:05:1e:34:e0:6b Permanent Port Name: 20:0c:00:06:2b:0f:72:6d Port Index: 8 Share Area: No Device Shared in Other AD: No Redirect: No Alternately use nscamshow | grep target PID to obtain the target PWWN only. FabricAdmin:switch>nscamshow | grep 0208 NL 0208d3; 3;20:0c:00:06:2b:0f:72:6d;20:00:00:06:2b:0f:72:6d; 4. Create a zone that includes the initiator and a target. Enter the zonecreate command followed by a zone name, the initiator PWWN and the target PWWN. FabricAdmin:switch>zonecreate itzone, "10:00:00:00:c9:2b:c9:3a; \ 20:0c:00:06:2b:0f:72:6d" 5. Create a zone configuration that includes the zone you created in step 4. Enter the cfgcreate command followed by a configuration name and the zone member name. FabricAdmin:switch>cfgcreate itcfg, itzone 6. Enable the zone configuration. FabricAdmin:switch>cfgenable itcfg You are about to enable a new zoning configuration. This action will replace the old zoning configuration with the current configuration selected. Do you want to enable 'itcfg' configuration (yes, y, no, n): [no] y zone config"itcfg" is in effect Updating flash ... 146 Fabric OS Encryption Administrator's Guide 53-1002159-03