HP Brocade 8/12c Fabric OS Encryption Administrator's Guide - Page 20
Document feedback
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
The serial number label is located as follows: • Brocade Encryption Switch-On the switch ID pull-out tab located inside the chassis on the port side of the switch on the left. • Brocade DCX-On the bottom right on the port side of the chassis • Brocade DCX-4S-On the bottom right on the port side of the chassis, directly above the cable management comb. 3. World Wide Name (WWN) Use the licenseIdShow command to display the WWN of the chassis. If you cannot use the licenseIdShow command because the switch is inoperable, you can get the WWN from the same place as the serial number, except for the Brocade DCX. For the Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at the top of the non-port side of the chassis. Document feedback Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and completeness of this document. However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number of the document and as much detail as possible about your comment, including the topic heading and page number and your suggestions for improvement. xviii Fabric OS Encryption Administrator's Guide 53-1002159-03