HP Brocade 8/12c Fabric OS Encryption Administrator's Guide - Page 253

Management application encryption wizard troubleshooting 6 TABLE 12 Error recovery instructions for adding a switch to a new group (Continued) Configuration task Error description Instructions Create a new master key (opaque key A failure occurred while attempting to vaults only) create a new master key. 1 Remove the switch from the group using the Group Members tab on the Encryption Group Properties dialog box. 2 Re-run the Configure Switch Encryption wizard for the switch. Manual Option: 1 Launch the Encryption Group Properties dialog box, and click Security. 2 Click the Master Key Action button and select Create New Master Key to generate a new master key. Save the switch's public key certificate to a file. The switch's public key certificate could not be saved to a file. Note: Verify that the path name and the file name that you are using are both valid and that you have write permissions for the file. 1 Remove the switch from the group using the Group Members tab on the Encryption Group Properties dialog box. 2 Re-run the Configure Switch Encryption wizard for the switch. Manual Option: 1 Save the switch's public key certificate to a file using the Switch Encryption Properties dialog box. 2 Follow the Key Vault instructions General errors related to the Configure Switch Encryption wizard Table 13 provides additional information for failures you might encounter while configuring switches using the Configure Switch Encryption wizard. TABLE 13 Problem General errors related to the Configure Switch Encryption wizard Resolution Initialization fails on the encryption engine after the encryption engine is zeroized. Reboot the switch. Configuration Commit fails with message "Default zone set to all Default zoning must be set to no access. access at one of nodes in EG." Fabric OS Encryption Administrator's Guide 233 53-1002159-03