HP Color 9850mfp Service Manual - Page 28

PRODUCT SPECIFICATIONS hp Color 9850mfp I OUTLINE Table 1. Features of the HP Color 9850mfp (continued) Networking Maximum monthly duty cycle z EFI print controller z 150,000 pages per month 1.2 Product specifications Note Identification A user-accessible label is located on the back cover of the engine. The model number is alphanumeric, such as Q3225A. The serial number contains information about the country of origin, product type, engine voltage, revision number, and engine serial number. An example of a serial number is JPHCB00001. Please refer to the 9850mfp Parts Manual, section How to use this manual for detailed information. The identification label also contains electrical information and regulatory information. The electrical information and regulatory information vary by country/region. Specifications Type: Console type (floor-mounted type) Copying method: Tandem intermediate transfer type electrostatic method Original table: Fixed Original alignment: Rear left side as reference Photosensitive material: OPC Sensitizing method: Paper feed trays: Laser writing 3 trays method (500 sheets x 3, 80 to 90g/m2) (400 sheets x 3, 105g/m2) Multisheet by-pass tray (250 sheets, 80 to 90g/m2) (200 sheets, 105g/m2) Q5690A (2500 sheets, 80 to 90g/m2, optional) Table 2. HP Color 9850mfp specifications Specification Out-of-box Height 1,179 mm (46.4 inches) Width 1,275 mm (50.2 inches) Depth 889 mm (35.0 inches) Weight 313 kg (690 lb) Packaged 1,210 mm (47.6 inches) 950 mm (37.4 inches) 1,258 mm (49.5 inches) 361 kg (796 lb) Table 3. Power requirements and circuit capacity Power source for inch area Power requirements 208 to 240 V (+/- 10%) 60 Hz Minimum recommended circuit capacity 3600 Watts (dedicated circuit) Power source for metric area 230 V, -14% +10.6% 50 Hz 3450 Watts (dedicated circuit) WARNING! Power requirements are based on the country/region where the MFP is sold. Do not convert operating voltages. This can damage the MFP and void the product warranty. 1-2