HP Color 9850mfp Service Manual - Page 440

Post insertion kit (Q3636A) product specifications Type Sheet feeder employing torque-limiter separation Functions Automatic sheet feed (online operation) The Q3636A automatically feeds sheets into the finisher in accordance with instructions from the MFP. Manual sheet feed (offline operation) User feeds sheets into finisher by operating the PI control panel. User can select from the following four finishing modes Single-staple mode (staple at rear) Two-staple mode (flat stapling) Punch mode (with punch kit) Staple-and-fold mode (available only if mounted to the Q3634A) Tri-fold mode (available only if mounted to the Q3634A) Manual sheet feed is only available with the lower tray. This is not allowed for wide papers. Upper tray copy sizes q Metric area A4, A4R, B5, B5R, A5 q Inch area Letter, Letter R, 5.5 by 8.5 Lower tray copy sizes q Metric area A3, B4, A4, A4R, B5, B5R, A5, F4 wide paper (314 mm by 445 mm maximum) q Inch area Ledger, 8.5 by 14, Letter, Letter R, 5.5 by 8.5, wide paper (314 mm by 445 mm maximum.) Paper staking capacity Up to 200 sheets (when using 128 g/m2 or 28 lb-equivalent paper) to maximum. height of 30 mm Paper curling Maximum 10 mm Amount of curl 5 sheets Copy paper Plain paper 60 to 90 g/m2 or 17 lb to 24 lb high-quality paper, recycled paper Special paper q 50 to 59 g/m2 or 13 lb to 16 lb high-quality paper, recycled paper q 91 to 200 g/m2 or 24 lb to 45 lb high-quality paper, recycled paper Printing paper q Double-sided art paper q Mat coating paper q High-quality paper Power, weight, dimensions Power source 24 VDC, 5 VDC (supplied from finisher) Maximum power 30 VA Weight Maximum 10.5 kg External dimensions Approximately 511 mm (W) by 620 mm (D) by 220 mm (H) 2 Post insertion overview ENWW