HP Color 9850mfp Service Manual - Page 429
ley to the wire that has been already inserted., notch [6] provided on the side of each pulley
View all HP Color 9850mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 429 highlights
Q5690A C. Reinstalling the wire 1. Insert the up/down wire A [2] into the hole [1] provided on the upper surface of the HCI main body. 2. Reinstall the up/down wire A [2] onto the guide pulleys [3], [4] and [5] in this order. Note: • When reinstalling the up/down wire A [2] onto the guide pulleys [3], [4] and [5], be sure to insert the wire into the pulley through the notch [6] provided on the side of each pulley and then move the wire cover [7] of each pulley to the wire that has been already inserted. When moving the wire cover [7], move it first to the position where the notch [6] can be avoided and then move the wire in the notch [6] into each pulley. 3. Insert the up/down wire A [2] into the wire installation hole [9] provided inside the up/down drive shaft [8]. Note: • The up/down drive shaft [8] is provided with 3 wire installation holes each on the front side and the rear side. In this step, the inner-most wire installation hole is used. 4. Insert the drive pulley [10] into the up/down drive shaft [8] so that the notch [11] of the drive pulley [10] comes to the position in which the up/down wire A [2] is put. 5. Fit the E-ring [12] and fasten the drive pulley [10]. TRAY UP/DOWN [6] [7] [2] [2] [1] [4] [2] [5] [2] [6] [3] [8] [10] [10] [11] [2] [7] [12] [9] [8] III DIS./ASSEMBLY 3-19