HP Deskjet 450 HP Deskjet 450 - User Guide - Page 78
Power LED on, Resume LED on, Right - reset
UPC - 844844844303
View all HP Deskjet 450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Power LED, Resume LED, Left and Right print cartridge LEDs on. New firmware is being flashed to the printer. No action required. Power LED on, Resume LED blinks, Right print cartridge LED turns on twice as long as off. Ink service module almost full. If you have a replacement for the ink service module, replace it immediately by following the instructions that come with it. Otherwise, visit www.hp.com/support/dj450 or see Support and warranty to get a replacement. In the meantime, you can press the Resume button to continue printing, but this LED error state will remain until the ink service module is replaced. When the ink service module is full, the printer will stop printing. Power LED on, Resume LED on, Right print cartridge LED turns on twice as long as off. Ink service module full. If you have a replacement for the ink service module, replace it immediately by following the instructions that come with it. Otherwise, visit www.hp.com/support/dj450 or see Support and warranty to get a replacement. Infrared LED on. In the meantime, you can remove the black print cartridge and print using only the tri-color print cartridge. The color results and print speed may be affected. See Single-cartridge printing mode. Printer is receiving infrared transmission. No action required. Power LED, Resume LED, Left and Right print cartridge LEDs cycle at fast rate. Printer error. Press the Resume button to print the error code. Press the Power button to reset the printer. C-4 ENWW