HP EliteDesk 800 G6 Maintenance and Service Guide - Page 40
Removing a secondary 3.5 inch hard drive, Lift the back of the drive
View all HP EliteDesk 800 G6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Press the release latch (2), and then remove the drive from the drive bay (3). Removing a secondary 3.5 inch hard drive To remove the secondary 3.5 inch hard drive, use these procedures. Before removing the hard drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 19). 3. Remove the optical drive (Optical drive on page 27). 4. Remove the front bezel (Front bezel on page 20). Remove the hard drive: 1. Pull the release lever outward (1). 2. Lift the back of the drive (2), slide the drive forward, and then lift the drive up and out of the drive bay (3). 3. Disconnect the cables from the drive (4). 30 Chapter 4 Removal and replacement procedures