HP EliteDesk 800 G6 Maintenance and Service Guide - Page 51
Hood lock, Hood sensor
View all HP EliteDesk 800 G6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
To install the serial port, reverse the removal procedure. Hood lock To remove the hood lock, use these procedures. Before removing the hood lock, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 19). Remove the hood lock: 1. Disconnect the hood lock cable (1) from the system board. 2. Remove the security screw (2) that secures the lock to the rear of chassis. 3. Pull the hood lock into the chassis to remove it (3). To install the hood lock, reverse the removal procedure. Hood sensor To remove the hood sensor, use these procedures. Before removing the hood sensor, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 19). Remove the hood sensor: 1. Disconnect the hood sensor cable (1) from the system board. Hood lock 41