HP EliteDesk 800 G6 Maintenance and Service Guide - Page 43
Expansion card
View all HP EliteDesk 800 G6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Remove the solid-state drive module: 1. Remove the screw that secures the drive (1). 2. Pull the drive out of the system board connector (2). To install the solid-state drive module, reverse the removal procedure. Expansion card The computer has one PCI Express ×1 expansion socket, two PCI Express ×16 expansion sockets, and one PCI Express ×8 expansion socket. Table 4-5 Expansion card descriptions Description Expansion cards NVIDIA Quadro P620 NVIDIA Quadro P400 AMD® Radeon™ R7 430 AMD Radeon R7 430, 2 DisplayPort connectors AMD Radeon RX550 NIC, Intel PRO/1000 Single Port GbE Parallel port Serial port + PS/2 NOTE: You can install a PCI Express ×1, ×8, or ×16 expansion card in the PCI Express ×16 socket. For dual graphics card configurations, you must install the first (primary) card in the PCI Express ×16 socket. Before replacing the expansion modules, follow these steps: Expansion card 33