HP EliteDesk 800 G6 Maintenance and Service Guide - Page 62

Pull the antenna cable out through the hole in the rear of the chassis, the back of the chassis

Get HP EliteDesk 800 G6 PDF manuals and user guides View all HP EliteDesk 800 G6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 19). 3. Depending on model, remove the air duct (Air duct (up to 65 W processor) on page 38 or fan (Fan with air duct (125 W processor) on page 39). 4. Disconnect the antenna cables from the WLAN module (WLAN module on page 36). 5. Remove the system board (System board on page 50). Remove the wireless antennas: 1. From the inside of the chassis, remove the antenna cables from the clips (1). 2. From the inside-rear of the chassis, press the tab on the plastic antenna cover (2), and then rotate the cover off the back of the chassis (3). 3. Remove the Torx screw from the antenna (4). 4. Pull the antenna cable out through the hole in the rear of the chassis (5). 5. Remove the screw from the front antenna (1), and then pull the antenna cable out through the hole in the front of the chassis (2). 52 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
19
).
2.
Remove the access panel (
Access panel
on page
19
).
3.
Depending on model, remove the air duct (
Air duct (up to 65 W processor)
on page
38
or fan (
Fan with air
duct (125 W processor)
on page
39
).
4.
Disconnect the antenna cables from the WLAN module (
WLAN module
on page
36
).
5.
Remove the system board (
System board
on page
50
).
Remove the wireless antennas:
1.
From the inside of the chassis, remove the antenna cables from the clips
(1)
.
2.
From the inside-rear of the chassis, press the tab on the plastic antenna cover
(2)
, and then rotate the
cover
off
the back of the chassis
(3)
.
3.
Remove the Torx screw from the antenna
(4)
.
4.
Pull the antenna cable out through the hole in the rear of the chassis
(5)
.
5.
Remove the screw from the front antenna
(1)
, and then pull the antenna cable out through the hole in
the front of the chassis
(2)
.
52
Chapter 4
Removal and replacement procedures